Start with your first smart device on Ultron APP

1. Scan it and name it

You can scan the QR Code on the device from either the entry portal that circle in red as the picture below.

  

Then, name the device.

2. Follow the instructions that shown in APP

During the setup process, the APP will guide you step by step. It usually spends no more than 1 min (depends on the WiFi condition).
When the smart devices move down from inactivated area, it's Connected.

 

• Related Articles

• Add a new scene on Ultron APP

  1. Arrange how your smart devices be like in the scene If you are going to set a "wake-up scene", arrange everything that are related to the scene first. For example, open the curtain, turn off the air-conditioner, playing pop music is your "wake-up ...

• Start with your new smart space on Ultron APP

  1. You should have your first location at the first time you sign in We believe you are definitely going to have a smart space once you are using Ultron APP. Therefore, the APP will guide you to have the first location at the first time using Ultron ...

• Ultron APP Introduction

  Downloads Search 「Ultron Utility APP」 Overview Ultron APP brings convenience to you all in ONE. Level up your spaces with multiple IoT devices across brands and types all through Ultron APP. Ultron APP is compatible with 60+ of smart appliance brands ...

• Functions on Ultron APP

  Functions Introduction 1. Location Management You can find/ add/ delete/ manage all your locations over here. 2. Get Started with Functions You can do following task over here: - Add device - Join the location you are invited - Add devices into a ...

• Start with your new group control on Ultron APP

  1. Start from the Home Page Select "Add Device Group". 2. Setup your device group Select the smart devices that you are going to set into a group. Then, name the group. When a set of devices are set as a group successfully, you can turn on and off ...